Roland VersaCAMM SP-540VS/SP-300VS
NAIL IT EVERY TIME WITH HEATWAVETM SUBLIMATION.
There's a new wave in sublimation and it's a hot one. It's called HeatWave and it has everything you need to produce bold, crisp sublimation graphics for jerseys, promotional items, awards, signage, tile murals, snow boards, banners and much more. With HeatWave, you get flawless sublimation transfers time after time. That's because every HeatWave system component has been customized and tested by Roland to perform in concert for the dependable, consistent results you require.
Features:
- A choice of two VersaCAMMTM printer/cutters — a 30" or a 54" model
- 4-color CMYK printing
- Up to 1440 dpi
- Powerful color management RIP software — a 30" Roland VersaWorks included.
- Perform as stand-alone vinyl cutters.
Model | SP-540VS | SP-300VS | |
| Printing / Cutting method | Piezo ink-jet method / media-moving method | ||
| Acceptable media widths | 210 to 1371 mm (8-5/16 to 54 in.) | 182 to 762 mm (7-3/16 to 30 in.) | |
| Printing / Cutting width *1 | Maximum 1346 mm (53 in.) | Maximum 736 mm (29 in.) | |
| Ink cartridges | Type | Roland Sublimation ink | |
| Capacity | 220 cc ± 5 cc | ||
| Color | Four colors (cyan, magenta, yellow, and black) | ||
| Printing resolution (Printing dot resolution) | Maximum 1,440 dpi | ||
| Acceptable tool | Special blade for CAMM-1 series | ||
| Cutting speed | 10 to 300 mm/s | ||
| Blade force | 30 to 300 gf | ||
| Blade offset compensation | 0.000 to 1.500 mm (0 to 0.0591 in.) | ||
| Software resolution (When cutting) | 0.025 mm/step (0.000984 in./step) | ||
| Distance accuracy (When printing) | While the print heater or dryer are not running *2 | Error of less than ± 0.3 % of distance traveled, or ± 0.3 mm, whichever is greater | |
| Distance accuracy (When cutting) *3 | Error of less than ± 0.4 % of distance traveled, or ± 0.3 mm, whichever is greater When distance correction has been performed (when the setting for [CALIBRATION] - [CUTTING ADJ.] has been made): Error of less than ± 0.2 % of distance traveled, or ±0.1 mm, whichever is greater | ||
| Repetition accuracy (When cutting) *3*4 | ± 0.1 mm or less | ||
| Repetition between printing and cutting *3*5 | ± 0.5 mm or less | ||
| Media dryer | Heating method, Setting range for the preset temperature: 35 to 50°C (95 to 122°F) | ||
| Ink -fixing device | Print heater, Setting range for the preset temperature: 35 to 50°C (95 to 122°F) | ||
| Interface | Ethernet (10BASE-T/100BASE-TX, automatic switching) | USB interface (compliant with Universal Serial Bus Specification Revision 1.1) | |
| Power-saving function | Automatic sleep feature (compliant with the International ENERGY STAR® Office Equipment Program) | ||
Power supply | Voltage and frequency | AC 100 to 120 V ± 10 %, 50 / 60 Hz or AC 220 to 240 V ± 10 %, 50 / 60 Hz | |
| Required power capacity | 8.8 A (100 to 120 V) or 4.7 A (220 to 240 V) | 6 A (100 to 120 V) or 3 A (220 to 240 V) | |
Power consumption | During operation | Approx. 1080 W (100 to 120 V) or 1230 W (220 to 240 V) | Approx. 470 W (100 to 120 V) or 650 W (220 to 240 V) |
| Sleep mode | Approx. 30 W | Approx. 29 W | |
Acoustic noise level | During operation | 64 dB (A) or less (according to ISO 7779) | |
| During standby | 40 dB (A) or less (according to ISO 7779) | ||
| Dimensions (With stand) | 2390 (W) x 800 (D) x 1291 (H) mm (94-1/8 (W) x 31-1/2 (D) x 50-7/8 (H) in.) | 1720 (W) x 770 (D) x 1275 (H) mm (67-3/4 (W) x 30-3/8 (D) x 50-1/4 (H) in.) | |
| Weight (With stand) | 149 kg (329 lb.) | 124 kg (273 lb.) | |
| Packed dimensions | 2560 (W) x 830 (D) x 1035 (H) mm (101 (W) x 32-3/4 (D) x 40-3/4 (H) in.) | 1890 (W) x 830 (D) x 900 (H) mm (74-1/2 (W) x 32-3/4 (D) x 35-1/2 (H) in.) | |
| Packed weight | 200 kg (441 lb.) | 161 kg (355 lb.) | |
| Environment | Power on | Temperature: 15 to 32°C (59 to 90°F ) (20°C [68°F ] or more recommended), humidity: 35 to 80 % (no condensation) | |
| Power off | Temperature: 5 to 40°C (41 to 104°F ), humidity: 20 to 80 % (no condensation) | ||
| Included items | Stand, power cord, blade, blade holder, replacement blade for separating knife, cleaning kit, software RIP, manuals, etc. | ||
*1 The length of printing or cutting is subject to the limitations of the program or driver. VersaWorks System Requirements
|
del.icio.us
Digg
Technorati
Print version
Plain text
Comments (0 posted):
Post your comment